ABOUT US

PORTFOLIO

PRICING

 ORDER

CONTACT

We print full size surfboard laminates & vinyl skins. Our skinz come in two materials ready for your photos, art or promotional needs.

 

Bright white photocloth fabric that can be laminated under the glass. This material delivers a very vibrant print with super crisp lines and no bleeding like you would see on rice paper. We can also match PMS colors for those corporate clients.

 

Vinyl Skins are printed on High Grade exterior vinyl using our long lasting exterior inks. These prints are guaranteed not to fade in direct sunlight and outlast your surfboard. These are easy to install yourself featuring a bubble free adhesive.

 

 

We fit your skin to your board, eliminating the aggravation of trying to get a smooth cut.

Portfolio

Half Skin

$45/each

 

Our most affordable option

featuring a 24"x36" graphic.

Deck Skin

$85/each

 

Our most popular option

featuring a top or bottom

graphic.

 

*Boards over 84" will be an additional $20

Photo Fabric Laminate

$85/each

 

We also print on a fabric that can be laminated under the glass.

 

*Boards over 84" will be an additional $20

Full Skin

$199/each

 

Great for promotional use

when you want the rails

wrapped.

 

Requires advanced installation.

 

*Boards over 84" will be an additional $40

Logo Laminates

$2/each

 

Small 6" shaper branded logos

printed on fabric.

 

Requires cutting with scissors.

 

*Minimum order of 25 lams.

We charge $65 per hour for design fees & layouts.

We require a photo of your board standing on its tail so we can trace your board shape for fitting the skin. Please send us your board photo along with any art you would like to incude.

Please fill out the form below with your order information. Use the dropittome link to upload your art and photos to our server. Once we receive your order we will be in touch with a price.

 

 

 

Enter password: playagraphics

www.dropitto.me/bradstyron

Required

Required

Required

Required

Required

Required

Submitting Form...

The server encountered an error.

Form received.

Required

Required

Required

Required

Captcha Image

Before you begin make sure you remove ALL the wax from the surface.

Any wax residue left on the surface will cause the skin to fail.

 

I recommend a citrus cleaner after scraping the wax off.

 

Step 1. Align the printed stringer to the real stringer and tape in place.

Step 2. Repeat step one on the tail, make sure the nose does not move.

Step 3. Install a tape line across the deck of the board holding the skin in place.

Step 4. Pull skin away from the liner paper and lay flat with adhesive side up.

Step 5. Cut liner paper off with scissors.

Step 6. Run squeegee down the stringer then from stringer to rails to get all the air out.

Step 7. Remove tape across deck and tail.

Step 8. Fold skin over and remove liner paper, repeat step five.

Step 9. Don’t worry about air bubbles, be careful not get wrinkles.

Step 10. Squeegee out air bubbles and your done.

Contact Us

SurfBoardSKINZ are a product of Playa Graphics

and located inside our studio in Emerald Isle, NC

 

tele: 252-503-0151

email: brad@playagraphics.com

 

Mailing Address:

324 Live Oak St.

Emerald Isle, NC 28594

 

Shipping Address:

100 Bogue Inlet Dr.

Emerald Isle, NC 28594

©2013 Intaglio Graphics & Multimedia. All rights reserved.

 

©2015 Surfboad Skinz. All rights reserved.

SITE MAP

TEAM

LEGAL

CONNECT WITH US

Brad Styron

DISCLAIMER

PRIVACY POLICY

TERMS OF USE